(Can be order in an HG 2800B-LM Configuration too.)

• The new HG 6600B-LM (Loader Mount) is the patented HG 6600B Hydra-Gate mounted on the front of a Riley built loader trailer. The HG 6600B-LM includes, delimber, gate, trough and trailer. Workspace is reduced substantially since the HG 6600B is mounted to the trailer. With one large non-removable pin, the Hydra-Gate is safely held in place, and can be transported to any job with ease. Once arriving at the job site, set up is easy. Simply drop the stabilizers, swing the trough to the left or right of the trailer, and begin delimbing.
  
  
• The HG 6600B-LM uses the proven Riley delimber. This delimber was designed to delimb single stems of hardwood / pine up to 20" or multiple stems of juvenile pine - limited only by the loaders capacity. With a (66") throat opening, the HG 6600B-LM’s delimber makes an easy target for loader operators trying to place multiple stems.
  
  
• Productivity is further enhanced with the delimber’s forward and reverse 8” knives (a Riley exclusive) that allows the operator to delimb trees in both directions - therefore reducing cycle times while reducing stresses on the loader!
  
  
• The Hydra-Gate design is very straight forward. The delimber is mounted on top of a 7' wide delimbing grid. This grid has 5 - 17" squares with removable 1/2" hi-tensile breaker chains and a 3" adjustable horizontal breaker bar.
  
  
• Using the Hydra-Gate on the job the operator simply pulls the stems through the delimber and allows the stems to fall into the Hydra-Gate trough. As the stems fall into the trough, they naturally fan outward. The loader operator pushes the stems back through the gate – completely delimbing them – and places them on the truck. This process gives the operator the flexibility to increase production significantly by using the delimber.